Knuchel Farben
Parent company with production and development for the areas of building protection, wood as well as automotive and industrial coatings.
COLORAMA
These are the sales outlets of Knuchel Farben AG throughout Switzerland. Here you can find out more about the range of services and opening hours.
11
Auxiliary materials

11.1  •  Brushes and brushes

3005 COLORAMA
paint brush
Inexpensive flat brush with black Chinese bristles, tin ferrule and raw wooden handle.
Further information
3006 COLORAMA
paint brush AQUA
Inexpensive flat brush with fully synthetic mixture, Stainless steel frame and raw wooden handle.
Further information
3007 Colorama
AQsynt paint brush bevelled
Trimming brush with high-quality synthetic trim, INOX stainless steel frame, raw handle, ideal for water- thinnable paints such as polyurethane and acyl paints etc., excellent paint pick-up, fine, even finish.
Further information
3050 COLORAMA
AQsynt paint brush
Best synthetic bristle mixture strength 12, which guarantees a high paint absorption even with low viscosity materials. Uniform ink application with optimum finish. Especially recommended for water dilutable materials.
Further information
3060 COLORAMA
KHsynt paint brush
Flat brush with synthetic bristle mixture strength 12, which ensures high paint absorption even with low viscosity materials. Uniform ink application with optimum finish. Especially recommended for solvent-based materials.
Further information
3070 COLORAMA
UNIsynt window brush
Oval paintbrush with synthetic bristle mixture and silver ferrule for high-quality painting work. Easy to clean and dimensionally stable. Ideally suited for solvent-based and water-dilutable materials.
Further information
3225 Lye brush
Nylon
Stripping brush with nylon bristles, plastic frame and raw wooden handle. For work with very aggressive materials such as paint strippers, alkalis, acids, etc.
Further information
3010 COLORAMA
radiator brush
Trimming brush with black Chinese bristles, cranked wooden handle and tin ferrule. Suitable for painting radiators, as a corner brush, for hard-to-reach areas, etc. Recommended for solvent-based and water-dilutable materials.
Further information
3015 COLORAMA
radiator brush AQsynt shorty
Radiator brush with high-quality synthetic trim, INOX stainless steel frame, short angled raw handle. Ideal for water-thinnable paints, excellent paint pick-up, fine, even finish.
Further information
3020 COLORAMA
AQsynt dispersion brush
Facade brushes with synthetic bristle mixture thickness 12, which ensures high paint absorption even with low viscosity materials. Easy to clean and dimensionally stable. Ideally suited for solvent-based and water-dilutable materials.
Further information
3226 Special
brushes
Special brush with 80cm long cranked wooden handle and black Chinese bristles. Ideal for cleaning work.
Further information
3045 COLORAMA
flat brush AQUA
Flat brush with synthetic bristle mixture for high-quality painting work. Easy to clean and dimensionally stable. Best suited for water-thinnable materials.
Further information
3040 COLORAMA
UNIsynt flat brush
Flat brush with synthetic bristle mixture for high-quality painting work. Easy to clean and dimensionally stable. Ideally suited for solvent-based and water-dilutable materials.
Further information
3030 COLORAMA
surface brush
Dense trimming of natural and synthetic bristles. Recommended for thin-bodied, solvent-based and water-thinnable materials such as impregnations, glazes, etc.
Further information
3035 COLORAMA
AQsynt distributor
Distributor with high-quality synthetic trim, INOX stainless steel frame, ideal for water-thinnable paints, excellent paint absorption, extremely fine and even finish.
Further information
3219 Painter
brush
Dense trimming of natural and synthetic bristles. Recommended for solvent-based and water-thinnable materials such as impregnations, primers, wallpaper paste, etc.
Further information
3218 Plaque
brush Duhalon
Oval painted wooden body with plastic handle. Recommended for the application of wallpaper paste, low viscosity materials, wetting of wallpaper etc.
Further information
3220 Paint
brush in tin can
Tinplate box with exchangeable 40mm flat brush. Rational working with the same product without brush cleaning, such as anti-rust primers, glue, touch-up paints, etc. (not suitable for water-dilutable materials).
Further information
3301 School
paintbrush
School painter brushes with nickel ferrules, short lacquered handles with fine hair mixture.
Further information
3302 Watercolour
brush synthetic
Brush with synthetic bristles and lacquered handle. Suitable for watercolours and repair of paint damage.
Further information
3306 Red
sable brushes
Watercolour brush with short, black handle and selected Siberian Kolinsky red sable hair. For fine, precise work.
Further information
3304 Enamel
paint brushes
Inexpensive universal brush with light china bristles, oval tinplate frame and raw wooden handle.
Further information
3303 Repair
brush
Repair brushes pointed shape with nickel ferrules and short handles.
Further information
3311 Repair
brush set
5-piece brush set for artistic work as well as touch-ups. Sizes 00,01,03,04,08.
Further information
3305 Cow
hair brush
Hobby paintbrushes made of black cow hair, with red handles and nickel ferrules.
Further information
3315 Gussow
brushes
Bright bristle trimming with long polished wooden handle. Recommended as a line puller.
Further information
4427 KWASTINETTE
brush pot for 6 brushes
Brush box made of stable, solvent-resistant plastic. With six clamping rings for optimum hold and airtight lid. For easy storage and protection of the brushes from drying out too quickly.
Further information
4425 PEKALINO
brush care box
Brush box made of aluminium, with compartment insert, base plate and foam inlay. Ideal for storing brushes, brushes and rollers. Protects from drying out too quickly.
Further information

11.2  •  Rollers, brackets and accessories

3515 ColoTop
varnishing roller
Paint roller with polyamide trimming (endless yarn) for professional results on structured surfaces. For water-based interior paints based on acrylic, silicone resin, siloxane and alkyd resin.
Further information
3516 ColoFin
varnishing roller
Ink roller with special microfibre mixture for streak-free results on smooth substrates. For water-based interior paints based on acrylic, silicone resin, siloxane and alkyd resin.
Further information
3560 ColoPro
spare roller
High quality polyamide fibre, 21mm pile for medium to coarse structured surfaces. Particularly suitable for facade, wall and ceiling paints, deep foundations and water and solvent-based impregnations. Large roller diameter for high area coverage, 21mm pile for maximum ink absorption.
Further information
3540 ColoRev
varnishing roller
Varnishing roller with special trimming of the latest generation. Ideal for processing water-based acrylic and PUR lacquers as well as synthetic resin lacquers.
Further information
3521 ColoMax
spare roller
High quality polyamide fibre, 18mm pile. For smooth to slightly structured surfaces. Especially suitable for water-thinnable and solvent-based coatings such as floor, wall and ceiling paints.
Further information
3630 ColoMic
spare roller
High quality microfibre, 9mm endless pile. Very high ink absorption. Particularly suitable for sealants, impregnations, deep foundations, floor paints, etc.
Further information
3510 ColoBlue
spare roller
High quality nylon fibre, 11mm pile. Especially suitable for solvent-based coatings such as floor paints, sealing lacquer, epoxy resins, etc.
Further information
3620 ColoRoy
spare roller
High quality nylon cover, 6mm pile. Recommended for 2-component rust protection primers, sealing lacquers, synthetic resin varnishes etc.
Further information
3700 MOLTOPREN
spare roller
Fine pored high density foam, rounded on both sides. Recommended for synthetic resin paints. Diameter 35mm.
Further information
3643 MOLTOPREN
scooter set
Ink tray with roller bar and 2 spare rollers.
Further information
3723 MOHAIR
spare roller
Excellent surface finish thanks to special pile mixture. Suitable for water-thinnable and solvent-based paints and varnishes.
Further information
3724 FELT
spare roller
Excellent surface finish thanks to natural fabric structure. The short-haired pile ensures an even, lint-free application of colour. Suitable for water-thinnable and solvent-based paints and varnishes.
Further information
3550 ColoMagic
varnishing roller
Foam roller with special surface structure for optimum paint absorption and release. Provides a first-class, streak-free surface finish. Ideal for the processing of water-based acrylic and PUR paints of the latest generation as well as for synthetic resin paints.
Further information
3650 COLORAMA
scooter set
Inexpensive roll made of very absorbent material with plastic grid. Pile length 22mm.
Further information
3820 LINOMAT
edge roller
For colour separations and exact boundaries. With replaceable protective plate for working with exact edge precision without additional covering work or prepainting with brush.
Further information
3823 LONGLIFE
corner roller
Scooter with polyamide cover with special bracket. Ideal for prepainting corners.
Further information
3810 Venting
roller with bar
Complete deaeration roller Ø 41mm with 11mm long spikes made of solvent-resistant plastic to prevent bubbles from forming after the coating process. For deaerating floor coatings, flowing screeds and levelling compounds.
Further information
3800 DUROSAFE
textured roll
Textured roller for "DUROSAFE" Rutsch-Stop FH-9000, also suitable for a wide variety of plastic effects as well as for roller, finish and ceiling plasters.
Further information
3910 Roller
bar galvanized
Galvanized roller bar with plastic handle.
Further information
3925 Roller
bar chrome-plated
Chrome-plated roller bar with plastic handle.
Further information
3915 Double
bracket for ColoRoy
Made of nickel-plated flat steel, metal handle for use with extension rods. For 40cm ink rollers.
Further information
3965 Plastic
mesh
Wiper grille made of solid plastic with limited resistance to solvents with hooks.
Further information
3960 Scraper
grille metal
Scraper grid perforated and galvanized for optimum scraping off of excess paint.
Further information
3951 Scooterbox
Blue roller box made of high-quality plastic, with felt inlay, lid with bayonet lock.
Further information
3930 Telescopic
extension bar
Light telescopic rod made of smooth, painted metal tube. Height adjustable via stable internal clamping.
Further information
3935 Telescopic
extension bar
Telescopic extension bar aluminium with click system. The special system guarantees a fixed shackle lock. Robust design with soft-touch handle.
Further information
3950 Paint
tray
Paint tray made of plastic for quick and clean work without a scraper grid.
Further information
3954 Plastic
bucket
Square plastic bucket with wiping surface and metal bracket.
Further information

11.3  •  Painting tools

4016 TECHNO
Painter's spatula
High quality tempered and conical sharpened blade with varnished wooden handle. Suitable for filling cracks and scraping off old paint and wallpaper.
Further information
4012 Forged
painter's spatula
Spatula forged and conically ground. With brass ferrule and rosewood handle. Suitable for filling cracks and for removing old paint and wallpaper.
Further information
4006 TECHNO
japan putty stainless steel
Smoothing trowel with flexible stainless steel blade and acid-proof plastic back. Suitable for the application of fillers.
Further information
4014 Set
of spatulas for bodywork
Filler set made of nitro-resistant plastic. Ideal for polyester putty.
Further information
4015 FENSTERFIX
wiper
Made of highly flexible, acid-resistant special plastic, for fast, clean smoothing of joint sealant.
Further information
4433 FUGENMEISTER
joint spatula set
Joint master angle templates, set of 3. Practical templates for professional smoothing of joint material.
Further information
4414 Putty
knife
Putty knife with slanted blade of stainless steel.
Further information
4410 DRIPLESS ETS-1400
cartridge gun Eco
Composite plastic construction with ergonomic handle. Thanks to the patented automatic stop mechanism, the putty does not run on. Thrust ratio 10 to 1. Not suitable for highly viscous putty.
Further information
4415 DRIPLESS ETS-2000
cartridge gun Profi
Composite plastic construction with ergonomic handle and integrated cutter knife. Thanks to the patented automatic stop, there is no overrunning of the adhesive mass. Cartridge body can be rotated 360° while working. Thrust ratio 12 to 1. not suitable for high viscosity putty.
Further information
4416 DRIPLESS ETS-3000
cartridge gun Profi
Composite plastic construction with ergonomic handle and integrated cutter knife. Thanks to the patented automatic stop, there is no overrunning of the adhesive mass. Cartridge body can be rotated 360° while working. Thrust ratio 18 to 1, especially suitable for highly viscous putty.
Further information
4432 PU
foam gun metal
Gun for the application of PU foam cans. Easy to dose with adjusting screw. Housing and gif made of metal.
Further information
4047 TOPLINE
plastic friction disc
Friction disc made of robust plastic and comfortable TPE handle.
Further information
4041 Plastic
friction disc pointed
Friction disk pointed from solid plastic.
Further information
4042 RONDO
plastic friction disc
Friction disc made of robust plastic with a pleasant TPE handle. Oval shape with right-angled corner.
Further information
4046 Stainless
steel trowel
Stainless steel trowel with comfortable TPE handle.
Further information
4048 Stainless
steel trowel
Stainless steel trowel with screwed wooden handle.
Further information
4050 Pointed
tooth trowel made of steel
Stainless steel toothed trowel with screwed wooden handle.
Further information
4431 Nail sole
Polypropylene plastic sole with 11 hardened 25mm steel nails. Suitable for all shoe sizes. For walking on fresh coatings and paints.
Further information
4030 Plasterer
spatula Inox
Stainless steel flat plasterer's spatula.
Further information
4031 Plasterer
spatula Inox
Offset plasterer's stuccoer's putty made of stainless steel. Handle made of pleasant TPE material.
Further information
4020 Bernese
plastering trowel Inox
Bernese style coating trowel made of stainless steel.
Further information
4032 Cat's
tongue trowel Inox
Stainless steel cat's tongue. Suitable for filling and plastering work of all kinds.
Further information
4040 Stuccoer's
iron
Stuccoer's iron travels of first class steel, handle with plastic cover.
Further information
4021 Plasterer's
pan
Plasterer's pan made of galvanized sheet steel.
Further information
4441 Plaster
cup
Plaster cup made of black natural rubber, conically shaped.
Further information
4380 Wood
stirrer
Stirring stick made of untreated wood with logo. Ideal for stirring paints and varnishes.
Further information
4370 Paint
stirrer plastic
Stirring rod made of solvent-resistant plastic, suitable for mixing paints, varnishes and pastes by hand.
Further information
4452 Dough
spatula
Rubber scraper with raw wooden handle.
Further information
4455 Viscosity
measuring cup
For checking and determining the viscosity of paints and varnishes.
Further information
4220 Dust
brush
Painter's dust brush with thick bristles to remove sanding dust.
Further information
4205 Wallpaper
brush
Wallpaper brush with natural and synthetic bristles. Lacquered wooden body with grip hole. Also suitable for delicate wallpapers.
Further information
4044 Wallpaper
cutting spatula Inox
Cutting spatula with glued plywood handle. For precise edge cuts for all wallpapering work.
Further information
4049 TECHNO
double surface filler Inox
Surface spatula with fine polished, hardened and stainless steel blade. The blade is slightly rounded and thus allows work to be carried out without any ridges.
Further information
4045 Wallpaper
pressing spatula
Plastic spatula with integrated handle and three usable pressure edges. Ideal for glass and non-woven wallpapers.
Further information
4444 Paste
syringe 10ml
Paste syringe made of plastic with 1 needle. For removing air bubbles under glued wallpaper.
Further information
4446 Spiked
roller
Spiked roller with wooden handle and V-shaped brass rollers for higher tearing effect. 50cm long wooden handle. Guarantees effortless perforation of large areas.
Further information
4447 Wallpaper
angel
Wallpaper gel for perforating and removing old wallpaper.
Further information
4429 MAXI
wallpaper tiger
The wallpaper tiger perforates old wallpaper so that wallpaper stripper and water vapour can quickly penetrate the old layer of paste.
Further information
4448 Wallpaper
roller
Rubber wallpaper roller cylindrical, made of soft plastic.
Further information
4449 Wallpaper
roller
Wallpaper roller conical, made of hard plastic.
Further information
4450 Wallpaper
scissors stainless steel
Shears made of stainless quality steel. Very flat cutting guide and high user comfort for right- and left-handed users.
Further information
4451 Wallpaper
table
Wallpaper table with sturdy aluminium frame, measurement scale and grip hole for transport in worktops.
Further information
4470 Stacking
trestles
Galvanized stacking trestles for storing freshly sprayed shutters or doors. With 10 editions.
Further information
4438 Paper
colour screen
Colour screen with nylon insert, lint-free and solvent-resistant. Colours can be screened quickly and with minimal effort.
Further information
4439 Colour
screen
Paint screen with mesh size 0,75mm. Ideal in combination with the paint screen holder art. 4439.2 With this attachment the nylon screen net hangs above the container and not in the paint.
Further information
4400 COLORAMA
wooden ladder ERGO
Craftsman's ladder especially for the requirements of painters. Has 36mm wide, horizontally installed rungs for comfortable fatigue-free standing. Hinges with additional spar clamps. Extra wide version with high-strength polyester safety belts.
Further information
4401 Wood
extension legs
For stepless compensation of uneven floors or stairs. Length: 150cm
Further information
4402 Conductor
shoes rubber
For working with rung stepladders on sensitive floors. spar size: 56mm
Further information
4403 ILLER
staircase ladder aluminium anodised
Especially for work in stairwells and on extremely uneven surfaces. The ladder has non-slip rubber feet and the extension legs can be continuously adjusted in seconds.
Further information
4404 ILLER
mounting bar aluminium
Ideal for freestanding work up to a working height of 3 metres. Can be folded flat for space-saving transport. Work surface made of non-slip aluminium chequer plate.
Further information
4480 ILLER
folding roller scaffold
Practical, easy-to-handle small scaffolding for all long term indoor and outdoor work. Load capacity up to 200 kg/m² working height: max. 2,85m scaffold can be extended with safety set art. 4480.2 (consisting of 2 guardrail frames and 3 cross braces).
Further information

11.4  •  Covering materials

4503 ColoTape
«Krepp K-101»
paper adhesive tape to 80 °C. Suitable for painting and plastering as well as for general use in the construction industry. Can also be removed without residue after 3 days.
Further information
4511 ColoTape
«Washi Pro»
Long term masking tape to 130 °C. Suitable for painters and plasterers as well as for general use in the construction industry. Suitable for many surfaces. For clean covering work with sharp coloured edges. Removable without residue for up to 120 days.
Further information
4507 ColoTape
«Washi Forte»
Long term masking tape to 150 °C. Suitable for painters and plasterers as well as for general use in the construction industry. Suitable for many surfaces. For clean covering work with sharp coloured edges. Removable without residue for up to 120 days.
Further information
4508 ColoTape
«Washi Ultra Sensitive»
Low adhesive strength and therefore ideally suited for wallpaper, acoustic plasterboard and sensitive or freshly painted surfaces. Can be removed without residue for up to 30 days.
Further information
4540 PERMAFIX 293
concrete fabric tape
Concrete mesh tape, ideal for indoor and outdoor construction work. With fine mesh and high adhesive strength even at low temperatures. Easy to tear. High tensile strength, very good weather and temperature resistance -50 to + 65°C.
Further information
4543 TESA fabric tape
4610 yellow 50mm x 50m¹
Fabric tape for universal use indoors and outdoors in industry and trade. Properties: Temperature resistant 95°C, very good hand tearability, straight tear edge, good adhesive strength on various materials.
Further information
4560 3M
double-sided adhesive tape
Sticks immediately and very strongly. Can be used on most floor coverings like cement, metal, tiles and wood. Not recommended for PVC.
Further information
4760 COVER-QUICK
Popular, time-saving masking system for the painting and varnishing sector. Good resistance to water and solvents. Smooth on one side. Folded once.
Further information
4625 PERMAFIX 054
Masking film with masking tape beige
Cover Quick with highly static HDPE film. Cover film with paper adhesive tape. The corona coating binds paint splashes on the film and prevents the paint from running down uncontrolled. Tear resistant, temperature resistant up to 80°C, solvent resistant.
Further information
4620 PERMAFIX
057 masking film with masking tape blue
Cover Quick with highly static HDPE film. Cover film with fabric adhesive tape. Suitable for rough surfaces. The corona coating binds paint splashes on the film and prevents uncontrolled paint run-off. Tear-resistant, temperature-resistant up to 80°C, solvent-resistant.
Further information
6560 Wrecking
blade for M3000K
Wrecking blade suitable for cover unit M3000K article 4930-3000.
Further information
4610 Masking
film PE to cover apparatus
PE cover film for the protection of furniture, fittings, windows etc. Waterproof and solvent-resistant. Antistatic and tear resistant. Suitable for M3000K hand cover.
Further information
4920 3M
hand cover device M1000
Lightweight model with interchangeable tear-off knife. For use with masking paper art. 4710-15 and 4710-22.
Further information
4710 Handcover
paper
Masking paper smooth on one side, high density and puncture resistance thanks to special glue additive, excellent ink adhesion properties. Suitable for manual masking machine M1000 art. 4920-1000.
Further information
4910 Covering
apparatus metal
Cover plate chrome-plated. For fast, large-area coverage. Suitable for masking paper 4750-30 or 4750-60 plus masking tape.
Further information
4750 Cover
paper «apparatus roll»
Masking paper ideal for painting and plastering, smooth on one side. Available in 30cm and 60cm. Suitable for masking machine art. 4910-30 and 4910-60.
Further information
4660 All-purpose
tarpaulin
The cover film cuttings are ideal for all smaller covering jobs during renovation and cleaning work. These blanks reliably protect against dirt, moisture and dripping paint during painting work.
Further information
4640 Masking
film PE
PE cover film for the protection of furniture, fittings, windows etc. Waterproof and solvent-resistant. Antistatic and tear resistant.
Further information
4655 Masking
film PE translucent recycled
The LDPE masking film is suitable for all masking work and reliably protects against dirt and moisture.
Further information
4670 Masking
film LDPE antistatic
Antistatic special film for masking work in rooms at risk of explosion.
Rs = 104 - 106 Ohm/cm.
Further information
4800 FLOORGUARD
cover fleece white
Non-slip and reusable cover fleece self-adhesive. The plastic foil on top reliably prevents the penetration of liquids. Protects floors reliably against dirt and mechanical injuries.
Further information
4801 FLOORSAVE
cover fleece grey
Cover fleece consisting of highly absorbent cotton fibres. The anti-slip membrane at the bottom prevents the penetration of liquids and allows safe non-slip working on the cover.
Further information
4720 Floor
covering paper
For covering floors during painting, plastering and general covering work. 150cm wide, 20 kg heavy.
Further information
4730 Cover
cardboard
Extra strong cover board for repeated use in plastering and painting work.
Further information

11.5  •  Abrasive products

5005 SIAREX
sheets series 1960
Resin-bonded sandpaper with semi-precious corundum. Offers high flexibility, high performance and a good finish on surfaces, contours and curves.
Further information
5010 SIAWAT
bow series 1913
Fully resin-bonded sandpaper with corundum. Waterproof and open sprinkled. Product with medium flexibility. Offers very high performance in manual use.
Further information
5020 SIAROL
sheets series 2915
Woven abrasive paper, adapts very well to curves and contours.
Further information
5100 SIAREXX
1960 stripes
Resin-bonded sandpaper with semi-precious corundum. Offers high flexibility, high performance and a good finish on surfaces, contours and curves. With velcro system.
Further information
5110 SIAREXX
1960 stripes
Resin-bonded sandpaper with semi-precious corundum. Offers high flexibility, high performance and a good finish on surfaces, contours and curves. With velcro system.
Further information
5130 SIALAC
strips series 1748
Resin-bonded special sandpaper, openly scattered, silicon carbide. Very high flexibility due to special coating. Very good finish in manual use on contours and curves. This quality is excellent for lacquer sanding.
Further information
5140 SIAVLIES
strips
Three-dimensional silicon carbide fibre non-woven. Can be used wet and dry on both sides. Very adaptable to contours and resistant to chemical cleaning agents. For sanding, derusting, matting and cleaning of wood, metal or painted surfaces.
Further information
5300 SIAREX
castor series 1960
Synthetic resin bonded sandpaper with semi-precious corundum. Offers high flexibility, high performance and a good finish on surfaces, contours and curves. For manual and mechanical use in the fields of wood, paint and varnish.
Further information
5310 SIAVLIES
role
Made of easily tearable fibre fleece. Can be used wet and dry on both sides. Very adaptable to contours and resistant to chemical cleaning agents. For sanding, derusting, matting and cleaning of wood, metal or painted surfaces.
Further information
5080 SIAREXX
1960 6-hole polygons
Resin-bonded sandpaper with semi-precious corundum. Offers high flexibility, high performance and a good finish on surfaces, contours and curves. With velcro system.
Further information
5220 SIAREXX
discs series 1960
Resin-bonded sandpaper with semi-precious corundum. Offers high flexibility, high performance and a good finish on surfaces, contours and curves. For machine application in the fields of wood, paint and varnish. With velcro system.
Further information
5230 SIAREXX
discs 8-hole series 1960
Resin bonded 8-hole grinding wheel with semi-precious corundum. Offers high flexibility, high performance and a good finish on surfaces, contours and curves. For machine application in the field of wood, paint and varnish. With velcro system.
Further information
5260 SIASPEED
discs s performance series 1950
Resin bonded multi-hole grinding wheel suitable for backing pads with dust extraction. Long service life thanks to optimum dust extraction. Ideal for the surface treatment of lacquers, paints, metal, plastic etc.
Further information
5413 BERG diamond
sanding disc
Diamond Velcro grinding wheel for grinding hard surfaces such as granite, concrete, natural stone, ceramics, metal, etc.
Further information
5290 BERG Grinding
wheel for long neck grinder
Multihole Velcro sanding paper for long neck sander art. 7502-225.
Further information
5292 BERG Grinding
grid for long neck sander
Velcro sanding grid for long neck sander art. 7502-225.
Further information
51000 FESTOOL Granat STF
stripes
Garnet sanding strips for the FESTOOL sanding machines RTS 400, RTSC 400, RS 400, RS 4, LS 130. Optimal for processing plastics, mineral materials, acrylic, filler, filler.
We serve you with all Festool machines, accessories and spare parts.
Further information
51010 FESTOOL Granat STF
DELTA Sanding discs
Delta sanding sheets for the FESTOOL machines DTS 400, DTSC 400, DS 400. Optimal for sanding plastics, mineral materials, acrylic, filler, filler.
We serve you with all Festool machines, accessories and spare parts.
Further information
51020 FESTOOL Granat STF
V93/6 sanding disc 50 pcs
Delta sanding sheets for the FESTOOL machines RO 90 DX, DELTEX, RS 300, RS 3, LRS 3. Optimal for sanding plastics, minerals, acrylics, fillers.
We serve you with all Festool machines, accessories and spare parts.
Further information
51030 FESTOOL Granat STF
D150/48 abrasive sheets
Grinding wheel for FESTOOL machines RO 150, ES 150, ETS 150, ETS EC 150, LEX 150, WTS 150, HSK-D 150. MULTI- JETSTREAM 2 function. Optimal for sanding plastics, mineal materials, acrylic, filler, filler.
We serve you with all Festool machines, accessories and spare parts.
Further information
51060 FESTOOL Granat STF
D125/8 abrasive sheets
Grinding wheels for the FESTOOL machines, Ro 125, ES 125, ETS 125, ETSC 125, ETS EC 125, LEX 125. Ideal for grinding plastics, mineral materials, acyl, filler, filler.
We serve you with all Festool machines, accessories and spare parts.
Further information
51040 FESTOOL Granat STF
D90/6 abrasive sheets
Sanding disc for FESTOOL machine RO 90 DX. Optimal for sanding plastics, mineral materials, acrylic, filler, filler.
Wir bedienen Sie mit sämtlichen Festool- Maschinen, Zubehör und Ersatzteilen.
Further information
51050 FESTOOL Granat STF
D225/48 absasive sheets
Sanding discs for the FESTOOL long-neck sanders PLANEX LHS 2 225 EQ(I), PLANEX 225 EQ, PLANEX LHS-E 225 easy. For sanding gypsum filler and cement-based filler.
We serve you with all Festool machines, accessories and spare parts.
Further information
5284 3M
cleaning disk
High-performance cleaning disc with very good grinding properties and long service life. Especially suitable for the removal of highly thermoplastic coatings such as bitumen varnishes, glue residues, etc. For use with the angle grinder M14. Max. 11'000 RPM.
Further information
5400 Plate
brush
Brush M14 with embedded abrasive grain. Very long service life. For structuring and cleaning of surfaces and profiles. Max. 2500 RPM.
Further information
5410 Circular
brush
Brush M14 with embedded abrasive grain. Very long service life. For structuring and cleaning of surfaces and profiles. Max. 2500 RPM.
Further information
4200 Steel
wire brush
Steel wire brush with raw wooden handle. Suitable for removing flash rust and old coatings on iron.
Further information
4210 Brass
wire brush
Brass wire brush with raw wooden handle. For surface treatment on wood and metal.
Further information
4230 Façade
wire brush
Wire brush made of blued steel wire with 40cm long wooden handle.
Further information
5420 Steel
wool
Steel wool, wrapped. From fine (00) to coarse (4). For cleaning and derusting.
Further information
5455 SIA backing
pad Ø 115 mm
Backing pad for rotary grinder or angle grinder M14. Suitable for grinding wheels with velcro system Siafast. Soft backing pad, for max. 11'000 RPM. For wood, paint and varnish.
Further information
5472 SIA
Backing pad Ø 115 mm SCM velcro
Backing pad for rotary grinder and angle grinder M14. Suitable for SCM discs. Backing pad hard, max. 8500 RPM.
Further information
5457 SIA backing
pad Ø 150 mm 103-holes, hard
Backing pads for all standard perforated grinding wheels. Optimal dust extraction. Accessories for 5/16" and M8. Suitable for orbital sanders.
Further information
5471 SIA supporting
plate Ø 115 mm for fibre discs
Support plate for angle grinder. In use with fibre discs. Backing pad hard, up to max. 13000 RPM.
Further information
5412 BERG backing pad
ø 100mm, M14
Backing pad Ø 100mm for rotary grinders and angle grinders with M14 thread. Suitable for grinding discs with velcro system.
Further information
5411 BERG  diamond
manual sanding block
Diamond hand grinding block for grinding hard surfaces such as natural stone, granite, marble, ceramic, etc. and for breaking cut edges.
Further information
5460 SIAFAST
hand sanding block
Medium hard sanding block with velcro system. Ideal for use with 70mmx125mm strips.
Further information
5462 Grinding
sponge coated on 4 sides
4-sided grinding sponge made of solid PU foam. Surface made of corundum grain. Ideal for sanding off old coats of paint and sanding various surfaces such as wood, metal etc.
Further information
5465 Sanding
pad coated on 2 sides
Sanding pad made of PU foam with corundum grain. Extra soft and adaptable. Ideal for sanding old paint coats as well as untreated workpieces made of wood, metal and plastic.
Further information
5466 Combination
sponge 4-sided
4-sided grinding sponge made of solid PU foam. Surface made of corundum grain. With bevelled sides for difficult to access areas. Ideal for sanding off old coats of paint and sanding various surfaces such as wood, metal etc.
Further information
5473 Cork
sanding block
Cork sanding block, hard. Suitable for dry sanding.
Further information
5474 Sanding
block with clamping strips
Hand sanding block with clamping strip.
Further information
5470 Sanding
block with joint
Sanding block with joint, clamping device and handle for extension rods.
Further information

11.6  •  Breathing and face protection

5516 DRÄGER 1320 V
fine dust mask FFP2
Fine dust mask with exhalation valve. High wearing comfort. Should only be used for protection against particles and non-volatile liquid aerosols. Fulfils the requirements of particulate filter class FFP2.
Further information
5517 DRÄGER 1730 V
fine dust mask FFP3
Fine dust mask with exhalation valve. High wearing comfort. Should only be used for protection against particles and non-volatile liquid aerosols. Fulfils the requirements of particulate filter class FFP3.
Further information
5518 DRÄGER 1920 V
fine dust mask FFP2
Fine dust mask with exhalation valve. High wearing comfort. Should only be used for protection against particles and non-volatile liquid aerosols. Fulfils the requirements of particulate filter class FFP2. Standards: EN 149:2001+A1:2009
Further information
5519 DRÄGER 1930 V
fine dust mask FFP3
Fine dust mask with exhalation valve. High wearing comfort. Should only be used for protection against particles and non-volatile liquid aerosols. Fulfils the requirements of particulate filter class FFP3. Standards: EN 149:2001+A1:2009
Further information
5520 3M
paint spray prefilter 400
Particle pre-filter for use with the respirator Art. 5521-4255.
Further information
5554 3M
respirator 6200 Kit
Half mask with replaceable filters. For painting and cleaning work with solvent-based materials. Protection level A2. Box contains: 1 mask body, 2 filters A2 against organic gases and vapours, 2 fine dust pre-filters and 2 filter covers.
Further information
5552 3M
mask body 6200
Half mask body made of skin-friendly materials with double filter system without filter.
Further information
5540 3M
full protection mask silicone 6800
Practical and skin-friendly full protection mask made of silicone. Wide field of vision with scratch-resistant polycarbonate lens. The 6000 series filters can be quickly and easily attached using a bayonet lock.
Further information
5553 3M
replacement filter 6055
Replacement filter for breathing masks art. 5554-6200 + 5540-6800 + 5552-6200.
Further information
5551 3M
fine dust prefilter 5925
Particle filters of protection class P2, are used for protection against solid and non-volatile liquid aerosols. Suitable for 3M masks item 5554-6200 + 5552-6200 + 5540- 6800.
Further information
5550 3M
filter cover 501
Filter housing cover suitable for 3M half masks Art. 5554-6200 + 5552-6200 + 5540-6800.
Further information
5541 3M
protective film for window 6885
Protective film suitable for full protection mask 5540-6800.
Further information
5580 3M
cleaning cloth 105
Caring cleaning cloth recommended for 3M masks Art. 5554-6200 + 5552-6200 + 5540-6800.
Further information
5525 5525
Maintenance-free half mask with 2 fixed activated carbon filters on the side, protection level FFA2P, against organic gases, vapours and harmful fine dusts. The pre- filters, protection level P2, can be replaced.
Further information
5526 GERSON
fine dust prefilter 26123
Particle filter of protection class P2R. Suitable for Gerson masks art.5525-8211 and art. 5525-8311.
Further information
5605 3M Solus 2000
safety glasses clear
Scratch-resistant and fog-free safety glasses with soft and profiled nose bridge. Adjustable temple length and inclination as well as soft temple ends. Good perception of optical signals. For protection against UV rays and mechanical effects.
Further information
5603 3M KLASSIK
full view goggles 2890
Full vision protection Goggles made of polycarbonate, scratch-resistant and fog-free. UV protection guaranteed. Ergonomic design with soft material for high comfort. For protection against molten metal, liquid particles, gases and vapours.
Further information

11.7  •  Occupational safety and clothing

6010 SEMPERGUARD
gloves nitrile
Disposable gloves without latex allergens with high abrasion resistance. Resistant to numerous chemicals, greases and oils.
Further information
6221 WONDER GRIP
U-Feel gloves yellow
Nitrile gloves made of seamless polyester and spandex liner. Very soft and thin for exceptional comfort and maximum precision. Grip for secure gripping in dry to oily applications. Heat protection class 1 certified.
Further information
6222 WONDER GRIP
Comfort gloves orange
Gloves with a double latex coating for high work protection and maximum durability. Thin and soft inner lining for suppleness and dexterity. Excellent grip and resistance in dry and slightly wet environments.
Further information
6223 WONDER GRIP
Aqua gloves blue
Double fully coated latex glove with nylon lining. Excellent grip in wet, water and dry conditions. Extremely comfortable and flexible.
Further information
6224 WONDER
GRIP Chem Defender gloves green
Nitrile gloves with resistance to chemical hazards in dry, oily or wet environments. The triple coating provides excellent ergonomic properties, unsurpassed grip in slippery environments and safe protection against chemicals. Thanks to the 30cm length, the hands are fully protected.
Further information
6250 Glove
Latex
Cotton flocked protective gloves made of natural latex. Working surface slightly roughened for good protection and tactile sensitivity. Protects against mechanical and chemical risks. Suitable for agriculture, light assembly work, chemical plants etc.
Further information
6260 Industrial
gloves latex
Made of natural latex without the addition of fillers. Very good resistance to mechanical risks and increased resistance to chemicals.
Further information
6270 Painter
glove
Cotton painter's glove with long cuffs and yellow coated underside. Very high wearing comfort. One size fits all. Ideal as a universal work glove.
Further information
6350 Protective suit
Med-Comfort 2, type 5/6
Protective suit made of breathable and water-repellent material. Suitable for handling paints, varnishes and dirt in general. Popular with car painters because it is lint-free. Hooded.
Further information
6420 Overshoes
wihte
Overshoes made of breathable and water-repellent material. Flat design. Suitable for handling paints, varnishes and dirt in general.
Further information
6430 PROTEX
head protection hood
Head protection hood made of breathable and water-repellent material. With elastic band and shoulder cover. Suitable for handling paints, varnishes and dirt in general.
Further information
6440 3M
ear plugs
Conically shaped earplugs made of soft, skin-friendly material. Offers secure protection and high wearing comfort.
Further information
6470 PELTOR
capsule ear protection
Height and width adjustment of the capsule, large headband with foam padding. Very soft, large sealing cushions for optimal sound insulation and perfect fit.
Further information
6460 Knee
pad gel
Ultralight knee pads, padded with gel inserts. Elastic closure straps prevent blood congestion and offer the highest wearing comfort.
Further information
9223 ColoLine
painter pants long white
Work trousers in top quality, 65 % cotton / 35 % polyester, 280g/m², with practical pockets on both sides, colour white with discreet light grey applications
Further information
92000 SNICKERS
AllroundWork stretch work pants
Comfortable work trousers in 2-way stretch twill with a technical look. Ergonomically cut legs with slim fit. KneeGuard® Pro system certified to EN 14404. Tool holder, leg pocket with knife holder, front loop with possibility for key hanger and classic bellows pocket with removable ID holder. 47 % cotton, 31 % polyester, 22 % elastane, 251g/m².
Further information
92100 SNICKERS
AllroundWork stretch work shorts
Slim fit work shorts made of a material mix of 2- and 4-way stretch for added flexibility and comfort. Velcro tool holder, classic holster pockets, leg pocket with knife closure, front loops with key holder option. 47% cotton, 31% polyester, 22% elastane, 237g/m².
Further information

11.8  •  Blades and scrapers

6520 Cutter
knives
Narrow snap-off knife with metal guide and blade lock.
Further information
6530 Cutter
knives
Wide snap-off knife with metal guide, blade lock and plastic handle.
Further information
6540 Professional
cutter knives
Universal knife cutter, snap-off knife with metal guide and including 2 replacement blades.
Further information
6610 Replacement
blades
8-way break-off blades made of hardened steel, extremely sharp and durable. Cuts wallpaper, carpet, cardboard etc.
Further information
6725 TECHNO
paint scraper
Professional scraper with stainless tungsten carbide blade. Suitable for removing old coats of paint.
Further information
6605 TECHNO
spare blades
Spare blade for TECHNO paint scraper.
Further information
6740 Window
scraper red
Scraper with flexible blade. For removing paint residues on smooth surfaces such as glass and ceramics.
Further information
6620 Replacement
blades for window scraper
Further information
6710 Universal
scraper
With 3 different blades and varnished wooden handle. For removing old coats of paint on wood and metal.
Further information
6700 Scraper
Carbide
For removing paint, adhesive residues and the like or for cleaning concrete surfaces, shuttering panels, shuttering timber etc.
Further information

11.9  •  Sponges

6805 MARINA
natural sponge mediterranean sea
High quality Mediterranean sponge, especially strong quality. Sand and shell free.
Further information
6840 Artificial
sponge
Made of particularly strong polyester foam, very hard-wearing. High water absorption, ideal for all rough cleaning work.
Further information
6890 Universal
sponge Moltopren
All-purpose sponge made of tear-resistant polyester foam. Also suitable for high demands. Ideal for car care, household and industry.
Further information
6810 Cleaning
sponge with fleece
Robust cleaning sponge with scouring fleece for removing stubborn dirt on insensitive surfaces. Also ideal for surface pretreatment before repainting as well as for the post-cleaning of waste lye work.
Further information
6850 Cleaning
sponge
Removes stubborn stains effortlessly without additional cleaning agents. Residues like grease, oil, etc. on smooth walls, kitchens, bathrooms, chrome steel, garden furniture, plastic windows, etc. Do not use on Plexiglas as it is slightly abrasive. Always use a sponge with water.
Further information
6880 Cleaning
sponge microfibre
Novel cleaning sponge. Cover of longhaired microfibre. Highly absorbent with great cleaning power. Ideal for cleaning work on surfaces such as plaster, glass and wood as well as for car washing.
Further information

11.10  •  Cleaning rags and cloths

7050 GLUTOCLEAN
hand cleaner
Hand cleansing cream for fast, effective and gentle skin cleansing. Oil-in-water emulsion with caring skin protection substances and skin-friendly rubbing agents.
Further information
7100 Cleaning
rags
Cloths made of mixed light fabrics. Absorbent and lint-free. For use when working in mechanical workshops, garages, locksmiths, building shops etc.
Further information
7101 Cleaning
rags
Cloths made of white assorted fabrics. Absorbent, button and seam free. No risk of fading!
Further information
7110 Polishing
threads
For the treatment, cleaning and polishing of sensitive surfaces, such as cars, motorcycles and all types of paint.
Further information
7111 Cotton
cleaning threads
Absorbent, soft threads with 95 % cotton content. Universally applicable.
Further information
7130 PUROL
cleaning moist wipes
Dirt dissolving for paints, greases and adhesives. Particularly skin-friendly thanks to gentle cleaning substances with a pleasant, fresh lemon fragrance.
Further information
7140 Polishing
cloths
Very soft and lint-free. For polishing and treatment of sensitive surfaces.
Further information
7150 Dust
binding cloth
Thanks to its adhesive substance, the duster removes even the smallest dust particles. Not suitable for use on hot surfaces. For treatment of all surfaces before painting.
Further information
7225 Deerskin
Leather from sheep, tanned with cod oil. Suitable For polishing smooth surfaces as well as for the decorative design of walls with the buckskin method.
Further information

11.11  •  Empty container

8005 Plastic
bucket oval
Further information
8010 Plastic
bucket round
Further information
8020 Plastic
round bucket
Further information
8040 Plastic
lidded drum
Further information
8050 Plastic
can UN rectangular
Further information
8060 Plastic
bottle rectangular
With scale, safety lock and tactile warning triangle.
Further information
8070 Plastic
bottle with dosing cap
Further information
8071 Plastic
spray bottle
Further information
8072 Plastic
spray bottle
Further information
8080 Plastic
screw box
Further information
8082 Plastic
club bottle HDPE
Further information
8090 Poison
bottle PE round
Further information
8093 Pipette
plastic
Pipette made of plastic with a scale of 0,5–3ml. Ideal for adding small quantities such as additives or colour pastes.
Further information
8092 Plastic
syringes PP transparent
Further information
8095 Mixing
cup PP
Paint and varnish mixing cup made of solvent-resistant polypropylene, with measurement and content designation.
Further information
8100 Tin
can
Further information
8105 Round
tin cans with large opening
Further information
8110 Tin
cans round
Further information
8115 Metal
can UN rectangular
Further information
8120 Slip
lid tin
Further information
8150 Tin
bucket
Further information
8180 Tin
barrel
Further information
8185 Lid-plate
drum
Further information
8200 Dabber
paint bottle plastic with brush and ball
Bottle made of stable plastic with screw cap and integrated brush.
Further information
8212 Lid-Plastic
taps with ventilation
Further information
8215 Plastic
stopcocks
Plastic stopcocks in polyethylene with rubber sealing shoulder on the thread. Outlet 11mm. Less suitable for solvents.
Further information
8220 HP-3
barrel pump plastic
Made of plastic, only conditionally suitable for alcohols and solvents. Do not leave the pump standing in the liquid after use.
Further information
8221 Barrel
pump stainless steel
Stainless steel multi-purpose pump for 50 and 200 lt drums. Suitable for solvents, petrol, diesel, lubricants, etc. Maximum flow rate 12 lt per minute. Length of suction pipe 75cm with infinitely variable height adjustment.
Further information
8250 SETTE
barrel cocks cast zinc
Injection moulded with nitrile seal, with automatic pressure lever lock, suspension hook for boiler, secured by padlock, suitable for mineral oils, heating oil, diesel and petrol.
Further information
8252 SPEED
barrel cocks nickel-plated
Lever lock with the possibility of fitting a lock, self-stopping, suitable for almost all media, with thread seal and lock nut.
Further information

11.12  •  Decoration and labelling material

7300 Signing
templates numbers
Number stencils made of zinc sheet metal for exact lettering on walls, wood, metal, parking spaces etc. Full set of 0 to 9.
Further information
7310 Signing
templates letters
Block letters stencils made of zinc sheet metal for exact lettering on walls, wood, metal, parking spaces etc. Full set of A to Z.
Further information
7340 Sheet
metal pattern label plate
Further information
9523 Colour tone
control test card
Further information