ADHERIT 1K-phosphate primer is a versatile corrosion protection and adhesion primer. Can be used in many cases even under 2-component top coats. ADHERIT is characterized by fast drying, excellent adhesion to ferrous and non-ferrous metals and good corrosion protection. The dry film quality can be compared with that of stoving primers.

ECLAZINC 1K-zinc dust primer is a high-quality 1-component primer for effective cathodic corrosion protection. Appropriately pre-treated (blasted) steel parts can be optimally protected. SBB approved.

INDUPLAST ACR 1K-primer is a versatile, fast drying rust protection and adhesion primer. This thick-film product is suitable for use in steel constructions. Furthermore as intermediate coat on 1-component zinc dust paints, hot-dip galvanizing, spray galvanizing, if an alkyd resin paint is subsequently used as top coat.

FERROTOL is an air- and oven-drying, thick-layer applicable one-coat paint for interior use. Adheres directly to iron, cast iron and zinc. Coating thicknesses of up to 150 µm are achieved in a single operation. Due to its excellent adhesion to various metals, FERROTOL can also be used as an adhesion primer. The most important properties of FERROTOL are its extremely fast drying and excellent corrosion protection. FERROTOL can also be used as a shop primer. If necessary, it can be painted over with suitable top coats after only 30 minutes.

FLUXAL 9707 1K-one-coat paint silky gloss is an air-drying one-coat paint with universal metal adhesion, even on aged galvanized substrates. Fluxal 9707 is characterized by an excellent barrier effect (diffusion barrier), so that excellent protective effects are achieved on metallic substrates without special mechanical stress. Due to its metallic character, Fluxal 9707 is extremely temperature-stable and can be used at temperatures up to 650°C (color change possible). Due to its high reflective effect when exposed to sunlight (> 75% reflection), Fluxal 9707 offers good exterior protection with a cooling effect for buildings, tanks, pipelines, corrugated sheet metal roofs, etc.

ACQUA-ETUVA 1K-phosphate primer is a water-dilutable corrosion protection primer. The solvent content is almost 5 %, which meets today's requirements for environmental protection. ACQUA-ETUVA 1K-phosphate primer offers very good corrosion protection, good condensation water resistance and excellent adhesion to iron, cast iron, aluminium and galvanized substrates. The primer can therefore also be used as an adhesive primer. ACQUA-ETUVA can also be easily overpainted with conventional (solvent-based) topcoats. Resistant to aqueous solutions of salts, drilling and cutting oils and to diluted acids and alkalis. The resistance to solvents is limited.

ACQUAFERROTOL 1K-micaceous silk matt is a water-dilutable, air- and oven-drying, thick-layer applicable material with best direct adhesion on iron and cast iron surfaces. ACQUAFERROTOL used both as a one-coat paint and as a primer with excellent corrosion protection under various top coats (including solvent-based). Coating thicknesses of up to 100 µm are achieved in a single operation. ACQUAFERROTOL also stands out for its rapid drying and good resistance to condensation water. ACQUAFERROTOL can also be used as an adhesion primer on existing coatings. Resistant to aqueous solutions of salts, drilling and cutting oils and to diluted acids and alkalis. The resistance to solvents is limited.

COROZINC V 1K-FH zinc dust primer is a corrosion protection primer with the best resistance properties. Moisture-curing zinc dust primers PU are significantly more elastic than conventional 1- and 2-component zinc dust primers. This means, especially with higher coating thicknesses, much higher mechanical resistance. COROZINC V can be painted over with any saponification-resistant 1K or 2K system (no alkyd resins). COROZINC V can also be used as a shop primer.

COROZINC 1K-FH zinc dust primer is a corrosion protection primer with the best resistance properties. Moisture-curing zinc dust primers PU are significantly more elastic than conventional 1- and 2-component zinc dust primers. This means, especially with higher coating thicknesses, much higher mechanical resistance. COROZINC can be painted over with any saponification-resistant 1K or 2K system (no alkyd resins). COROZINC can also be used as a shop primer.

COROZINC M is a primer specially designed for use with permanent water exposure (steel hydraulic engineering). Contains 92 % metallic zinc. Moisture-curing zinc dust primers PU are significantly more elastic than conventional 1- and 2-component zinc dust primers. This means, especially with higher coating thicknesses, much higher mechanical resistance. COROZINC M can be painted over with any saponification-resistant 1K or 2K system (no alkyd resins). COROZINC M can also be used as a shop primer.

COROZINC 89 1K-FH zinc dust primer is a corrosion protection primer with the best resistance properties. Moisture-curing zinc dust primers PU are significantly more elastic than conventional 1- and 2-component zinc dust primers. This means, especially with higher coating thicknesses, much higher mechanical resistance. Corresponds to the specifications according to TL/TP-KOR – Steel structures; Annex E; Sheet 89.

COROPUR is a 1-component, moisture-curing primer with aluminum pigmentation and a high solid content. It is used as an adhesion-promoting as well as insulating primer in the «gentle renovation» of old corrosion protection coatings on manually or mechanically derusted steel surfaces where sandblasting is out of the question for environmental and / or cost reasons. Due to the specially selected binder combination, the COROPUR 1K-FH bonding and insulating primer offers significant advantages over the so-called residual rust tolerant or surface tolerant primers and intermediate coatings commonly available on the market.

COROPUR is a versatile polyurethane primer with excellent corrosion protection properties. Especially suitable for use on the object or under difficult climatic conditions such as low temperatures or high humidity. Excellent adhesion and strong resistance to solvents and many chemicals. Used in thin layers (≤ 30 µm) as a welding primer, the product serves as a temporary corrosion protection for steel components still to be welded. No toxic fumes are generated, the burn off zone remains narrow and the quality of the welding bead is not affected.

COROPUR 1K-FH intermediate micaceous iron coating is primarily used, in combination with moisture-curing systems, as an intermediate coating in corrosion protection systems from corrosivity category C3. The special, lamellar structure of the iron mica pigmentation, in combination with the PU binder, results in coatings with excellent water and corrosion resistance. COROPUR can be applied by airless application to vertical surfaces with a dry film thickness of up to 150 µm.

COROPUR 89 1K-FH intermediate micaceous iron coating is primarily used, in combination with moisture-curing systems, as an intermediate or top coat in interior areas. Corresponds to the specifications according to TL/TP-KOR – Steel structures; Annex E; Sheet 89. The special, lamellar structure of the iron mica pigmentation, in combination with the PU binder, results in coatings with excellent water and corrosion resistance. COROPUR 89 can be applied by airless application to vertical surfaces with a dry film thickness of up to 150 µm.

FERROTOL is an air- and oven-drying, thick-layer applicable one-coat paint for interior use. Adheres directly to iron, cast iron and zinc. Coating thicknesses of up to 150 µm are achieved in a single operation. Due to its excellent adhesion to various metals, FERROTOL can also be used as an adhesion primer. The most important properties of FERROTOL are its extremely fast drying and excellent corrosion protection. FERROTOL can also be used as a shop primer. If necessary, it can be painted over with suitable top coats after only 30 minutes.

FLUXAL 9707 1K-one-coat paint silky gloss is an air-drying one-coat paint with universal metal adhesion, even on aged galvanized substrates. Fluxal 9707 is characterized by an excellent barrier effect (diffusion barrier), so that excellent protective effects are achieved on metallic substrates without special mechanical stress. Due to its metallic character, Fluxal 9707 is extremely temperature-stable and can be used at temperatures up to 650°C (color change possible). Due to its high reflective effect when exposed to sunlight (> 75% reflection), Fluxal 9707 offers good exterior protection with a cooling effect for buildings, tanks, pipelines, corrugated sheet metal roofs, etc.

INDUPLAST ACR 1K-patina effect lacquer is a fast drying 1-component duplex system. It is particularly suitable as a top coat for hot-dip galvanizing and zinc dust primers. As an effect varnish it shows a uniform and decorative structure, which is supposed to simulate patination. A very good gloss and chalking resistance is given.

INDUPLAST ACR are broadly applicable, fast drying, light and weather resistant coatings. Particularly suitable for the protection of fresh and weathered hot-dip galvanized coatings (DUPLEX system). In combination with suitable primers, can also be used as a corrosion protection top coat for iron and steel structures in exterior and interior areas. INDUPLAST ACR is resistant to various weak acids and alkalis, but not to organic solvents.

INDUPLAST ACR are broadly applicable, fast drying, light and weather resistant coatings. Particularly suitable for the protection of fresh and weathered hot-dip galvanized coatings (DUPLEX system). In combination with suitable primers, can also be used as a corrosion protection top coat for iron and steel structures in exterior and interior areas. INDUPLAST ACR is resistant to various weak acids and alkalis, but not to organic solvents.

INDUPLAST ACR 93 1K-micaceous iron is a low-solvent containing coating which is provided with active anti-corrosion pigments. It is especially recommended as a repair coating for weathered 1-component old coatings as well as fresh or weathered hot-dip galvanized coatings. The product is adjusted for application by brush (tuber brush). Dry film thicknesses > 100 μm can be achieved with one coat.

INDUPLAST ACR 1K-insulating coating is a fast drying duplex system with good direct adhesion on dust-blasted hot-dip galvanized and blasted steel. Very good light and weather resistance. INDUPLAST ACR is resistant to various weak acids and alkalis, but not to organic solvents.

ACQUAFERROTOL 1K-micaceous silk matt is a water-dilutable, air- and oven-drying, thick-layer applicable material with best direct adhesion on iron and cast iron surfaces. ACQUAFERROTOL used both as a one-coat paint and as a primer with excellent corrosion protection under various top coats (including solvent-based). Coating thicknesses of up to 100 µm are achieved in a single operation. ACQUAFERROTOL also stands out for its rapid drying and good resistance to condensation water. ACQUAFERROTOL can also be used as an adhesion primer on existing coatings. Resistant to aqueous solutions of salts, drilling and cutting oils and to diluted acids and alkalis. The resistance to solvents is limited.

ACQUATOL is a water-dilutable, quick-drying spray paint for weather-resistant and chalking-resistant coatings.

ACQUATOL is a water-dilutable, quick-drying spray paint for weather-resistant and chalking-resistant coatings.

ACQUATOL is a water-dilutable, quick-drying spray paint for weather-resistant and chalking-resistant coatings.

COROPUR 1K-FH intermediate micaceous iron coating is primarily used, in combination with moisture-curing systems, as an intermediate coating in corrosion protection systems from corrosivity category C3. The special, lamellar structure of the iron mica pigmentation, in combination with the PU binder, results in coatings with excellent water and corrosion resistance. COROPUR can be applied by airless application to vertical surfaces with a dry film thickness of up to 150 µm.

COROPUR LS 1K-FH finishing micaceous iron coating serves primarily, in combination with moisture-curing systems, as a high-quality top coat. The special, lamellar structure of the iron mica pigmentation, in combination with the PU binder, results in coatings with excellent water and corrosion resistance. COROPUR LS can be applied by airless application to vertical surfaces with a dry film thickness of up to 150 µm.

COROPUR 89 LS 1K-FH finishing micaceous iron coating serves primarily, in combination with moisture-curing systems, as a high-quality top coat. Corresponds to the specifications according to TL/TP-KOR – Steel structures; Annex E; Sheet 89. The special, lamellar structure of the iron mica pigmentation, in combination with the PU binder, results in coatings with excellent water and corrosion resistance. COROPUR 89 LS can be applied by airless application to vertical surfaces with a dry film thickness of up to 150 µm.

COROPUR is a moisture-curing, light, weather and chemical resistant top coat based on polyurethane resin. COROPUR can be applied at low temperatures and high humidity without any problems. The rapid drying and hardening of the coating film allows the coated objects to be manipulated quickly, thus reducing downtimes.

COROPUR is a moisture-curing, light, weather and chemical resistant top coat based on polyurethane resin. COROPUR can be applied at low temperatures and high humidity without any problems. The rapid drying and hardening of the coating film allows the coated objects to be manipulated quickly, thus reducing downtimes.

COROPUR 89 is a moisture-curing, light, weather and chemical resistant top coat based on polyurethane resin. COROPUR 89 can be applied at low temperatures and high humidity without any problems. The rapid drying and hardening of the coating film allows the coated objects to be manipulated quickly, thus reducing downtimes. Corresponds to the specifications according to TL/TP-KOR – Steel structures; Annex E; Sheet 89.

COROPUR Teer is a combination of a moisture-curing (FH) polyisocyanate and tar. COROPUR Teer is, comparable to the usual 2-component epoyy- or polyurethane tar coating materials, particularly suitable for the long-term corrosion protection of all steel surfaces. It is particularly characterized by high abrasion resistance, chemical resistance and low water and water vapour diffusion. Permanent temperature resistant: 60 °C up to a maximum of 80 °C

ECLON PUR HS is an extremely extensive, thick layer 2-component PUR coating with good resistance properties. Excellent adhesion to various substrates. The essential advantages at a glance: Economically extremely interesting thanks to high solid matter (less VOC steering charge, environmentally friendly) – Rational processing: rapid drying even at low temperatures – Excellent durability, no run-off, even with thick layers. – Resistant to water, acids, alkalis, washing lye, etc. – Good UV resistance with Hardener AL respectively Hardener AL FLUID .

ECLON PUR C3 is an extremely extensive, thick layer 2-component PUR coating with good resistance properties. Excellent adhesion to various substrates. The essential advantages at a glance: – Economically extremely interesting thanks to high solid matter (less VOC steering charge, environmentally friendly) – Rational processing: rapid drying even at low temperatures – Excellent durability, no run-off, even with thick layers. – Good UV resistance – Resistant to water, acids, alkalis, washing lye, etc.

ECLON PUR C3 is an extremely extensive, thick layer 2-component PUR coating with good resistance properties. Excellent adhesion to various substrates. The essential advantages at a glance: – Economically extremely interesting thanks to high solid matter (less VOC steering charge, environmentally friendly) – Rational processing: rapid drying even at low temperatures – Excellent durability, no run-off, even with thick layers. – Good UV resistance – Resistant to water, acids, alkalis, washing lye, etc.

ECLON EP OT 2K-primer is a high-quality, surface-tolerant adhesion and corrosion protection primer based on 2-component epoxy resin. Especially suitable for the first coating of mechanically cleaned (hand derusted) surfaces.

ECLON EP OT 2K-primer is a high-quality, surface-tolerant adhesion and corrosion protection primer based on 2-component epoxy resin. Especially suitable for the first coating of mechanically cleaned (hand derusted) surfaces.

ECLAPOX EP 2K-phosphate primer and the ECLAPOX EP Quick variant, which is created by using the appropriate hardener, offer protection and adhesion in one. Both are particularly characterized by fast drying, high mechanical strength, chemical resistance and very good adhesion and corrosion protection. ECLAPOX EP can also be processed at temperatures down to 0 °C.

ECLAPOX HS 2K-phosphate primer offers protection and adhesion in one. Particularly characterized by fast drying, high mechanical strength, chemical resistance and very good adhesion and corrosion protection.
According to Armasuisse paint regulation M 040 230

ECLON EP 2K-phosphate primer and the ECLON EP Quick variant, which is created by using the appropriate hardener, offer protection and adhesion in one. Both are particularly characterized by fast drying, high mechanical strength, chemical resistance and very good adhesion and corrosion protection. ECLON EP can also be processed at temperatures down to 0 °C.
As such, fulfils the conditions of BN 108 / BN 109.

ECLON EP 87 2K-zinc dust primer is a 2-component epoxy resin corrosion protection primer with excellent adhesion on blasted substrates. Characterized by highest durability and can be overpainted with any saponification-resistant 1- and 2-component system. Meets the requirements of Sheet 87 - TL/TP-KOR, steel structures (according to internal testing).

ECLON EP 87 2K-phosphate primer offers protection and adhesion in one. It is particularly characterized by high mechanical strength, chemical resistance and very good adhesion and corrosion protection. Meets the requirements of sheet 87 - TL/TP-KOR, steel structures (according to internal testing).

ECLON EP 2K-micaceous iron is a high-quality scale armour coating with high mechanical and chemical resistance. Dry film thicknesses of up to 150 µm can be achieved in a single pass. The pigmentation with micaceous iron ore creates a rough surface in addition to the barrier effect desired in corrosion protection. The best prerequisite for a perfectly adhering PU-based top coat.

ECLON EP 87 2K-micaceous iron is a high-quality scale armour coating with high mechanical and chemical resistance. Dry film thicknesses of up to 150 µm can be achieved in a single pass. The pigmentation with micaceous iron ore creates a rough surface in addition to the barrier effect desired in corrosion protection. The best prerequisite for a perfectly adhering PU-based top coat.

ECLON EP 2K-adhesive compound is a solvent-free adhesive coating based on polyurethane epoxy resin. In combination with ECLON EP 87 2K-micaceous iron as a primer, the ECLON EP 2K-adhesive compoundProvides the necessary bond between the protective layer and the orthotropic steel roadway slab. It firmly binds the chippings and shows no change in properties after application of mastic asphalt.

ECLON EP THIX 2K-adhesive compound is a solvent-free, non-self-levelling adhesive coating based on polyurethane epoxy resin. In combination with ECLON EP 87 2K-micaceous iron as a primer, the ECLON EP THIX 2K-adhesive compoundProvides the necessary bond between the protective layer and the orthotropic steel roadway slab. It firmly binds the chippings and shows no change in properties after application of mastic asphalt.

ECLON PUR HS is an extremely extensive, thick layer 2-component PUR coating with good resistance properties. Excellent adhesion to various substrates. The essential advantages at a glance: Economically extremely interesting thanks to high solid matter (less VOC steering charge, environmentally friendly) – Rational processing: rapid drying even at low temperatures – Excellent durability, no run-off, even with thick layers. – Resistant to water, acids, alkalis, washing lye, etc. – Good UV resistance with Hardener AL respectively Hardener AL FLUID .

ECLON PUR DA 2K mica is a thick-film topcoat for best weather and chemical resistance. ECLON PUR DA 2K mica is suitable both as a one-coat paint and as a top coat for paint structures and for coating hot-dip galvanizing (duplex systems). The adhesion to iron, aluminium and zinc is excellent. The essential advantages at a glance: – Rapid drying – Excellent weather resistance – Resistant to water, acids, alkalis, washing lye, etc. – Good adhesion to aluminium and the various galvanized surfaces.

ECLON PUR C3 is an extremely extensive, thick layer 2-component PUR coating with good resistance properties. Excellent adhesion to various substrates. The essential advantages at a glance: – Economically extremely interesting thanks to high solid matter (less VOC steering charge, environmentally friendly) – Rational processing: rapid drying even at low temperatures – Excellent durability, no run-off, even with thick layers. – Good UV resistance – Resistant to water, acids, alkalis, washing lye, etc.

ECLON PUR DA 2K-micaceous iron is a thick-film topcoat for best weather and chemical resistance. ECLON PUR DA 2K-micaceous iron is suitable both as a one-coat paint and as a top coat for paint structures and for coating hot-dip galvanizing (duplex systems). The adhesion to iron, aluminium and zinc is excellent. The essential advantages at a glance: – Rapid drying – Excellent weather resistance – Resistant to water, acids, alkalis, washing lye, etc. – Good adhesion to aluminium and the various galvanized surfaces.

ECLON PUR C3 is an extremely extensive, thick layer 2-component PUR coating with good resistance properties. Excellent adhesion to various substrates. The essential advantages at a glance: – Economically extremely interesting thanks to high solid matter (less VOC steering charge, environmentally friendly) – Rational processing: rapid drying even at low temperatures – Excellent durability, no run-off, even with thick layers. – Good UV resistance – Resistant to water, acids, alkalis, washing lye, etc.

ECLON PUR DS is an extremely versatile, highly weather-resistant 2-component topcoat for exterior and interior use. Produces thick-film surfaces, both smooth and structured. Depending on the degree of dilution, spray pressure and nozzle size, different structural effects can be achieved. The structural effect covers scratches, grinding marks, casting roughness and other irregularities on material surfaces. This often eliminates time-consuming sanding and filling work. Simple processing without runner formation, even with complicated geometry. Excellent direct adhesion to a wide variety of substrates. Very good colour and gloss resistance to weathering and very good surface hardness and scratch resistance. good resistance to diluted chemicals, hand perspiration, coolant up to 50 °C, cleaning agents, hydraulic oils and as well

ECLON PUR DA 2K-micaceous iron is a thick-film topcoat for best weather and chemical resistance. ECLON PUR DA 2K-micaceous iron is suitable both as a one-coat paint and as a top coat for paint structures and for coating hot-dip galvanizing (duplex systems). The adhesion to iron, aluminium and zinc is excellent. The essential advantages at a glance: – Rapid drying – Excellent weather resistance – Resistant to water, acids, alkalis, washing lye, etc. – Good adhesion to aluminium and the various galvanized surfaces.

ECLON PUR is a highly weather-resistant, fast drying 2-component coating based on polyurethane resin for exterior and interior use. Simple processing without runner formation, even with complicated geometry. Produces, depending on the colour shade, silk matt to silk gloss, smooth surfaces, which should simulate a patina (métallisé effect). Excellent direct adhesion to a wide variety of substrates. Very good surface hardness and scratch resistance as well as resistance to diluted chemicals, hand perspiration, coolant and cleaning agents.

ECLON PUR ACR 2K-enamel matt is a two-component paint based on polyurethane resin. ECLON PUR ACR is especially characterized by high resistance to moisture, salt, industrial dirt, solvents and many chemicals. In addition to its excellent weather and chemical resistance, ECLON PUR ACR has the following properties: Good filling power / No wrinkling / No yellowing / No bubble formation, even with thicker layers / Efficient working thanks to fast drying even at low temperatures (5 °C), thus fast masking and higher productivity. Approval Type «W» (chemical industry approval) according to BN 108/109 in the systems «WBZ» and «WBR».

ECLON PUR ACR 2K-enamel satin matt is a two-component paint based on polyurethane resin. ECLON PUR ACR is especially characterized by high resistance to moisture, salt, industrial dirt, solvents and many chemicals. In addition to its excellent weather and chemical resistance, ECLON PUR ACR has the following properties: Good filling power / No wrinkling / No yellowing / No bubble formation, even with thicker layers / Efficient working thanks to fast drying even at low temperatures (5 °C), thus fast masking and higher productivity. Approval Type «W» (chemical industry approval) according to BN 108/109 in the systems «WBZ» and «WBR».

ECLON PUR ACR 2K-enamel silk gloss is a two-component paint based on polyurethane resin. ECLON PUR ACR is especially characterized by high resistance to moisture, salt, industrial dirt, solvents and many chemicals. In addition to its excellent weather and chemical resistance, ECLON PUR ACR has the following properties: Good filling power / No wrinkling / No yellowing / No bubble formation, even with thicker layers / Efficient working thanks to fast drying even at low temperatures (5 °C), thus fast masking and higher productivity. Approval Type «W» (chemical industry approval) according to BN 108/109 in the systems «WBZ» and «WBR».

ECLON PUR ACR 2K-enamel gloss is a two-component paint based on polyurethane resin. ECLON PUR ACR is especially characterized by high resistance to moisture, salt, industrial dirt, solvents and many chemicals. In addition to its excellent weather and chemical resistance, ECLON PUR ACR has the following properties: Good filling power / No wrinkling / No yellowing / No bubble formation, even with thicker layers / Efficient working thanks to fast drying even at low temperatures (5 °C), thus fast masking and higher productivity. Approval Type «W» (chemical industry approval) according to BN 108/109 in the systems «WBZ» and «WBR».

ECLON PUR ACR 2K-enamel pearl effect is a two-component paint based on polyurethane resin. ECLON PUR ACR is especially characterized by high resistance to moisture, salt, industrial dirt, solvents and many chemicals. In addition to its excellent weather and chemical resistance, ECLON PUR ACR has the following properties: Good filling power / No wrinkling / No yellowing / No bubble formation, even with thicker layers / Efficient working thanks to fast drying even at low temperatures (5 °C), thus fast masking and higher productivity. Approval Type «W» (chemical industry approval) according to BN 108/109 in the systems «WBZ» and «WBR».

ECLON PUR ACR 2K-micaceous iron is a high solids, highly weather-resistant corrosion protection coating based on polyurethane and acrylic resin. The dry film is highly resistant to moisture, salt, industrial fumes, solvents and many chemicals. Other notable properties of ECLON PUR ACR 2K-micaceous iron are: – Good filling power – No wrinkling – Resistant to water, acids, alkalis, washing lye, etc. – No bubble formation, even with thicker layers – Efficient working thanks to fast drying even at low temperatures (5 °C), thus fast masking and higher productivity.

ECLON PUR ACR 87 2K-micaceous iron is a high solids, highly weather-resistant corrosion protection coating based on polyurethane and acrylic resin. The dry film is highly resistant to moisture, salt, industrial fumes, solvents and many chemicals. Other notable properties of ECLON PUR ACR 87 2K-micaceous iron are: – Good filling power – Resistant to water, acids, alkalis, washing lye, etc. – No bubble formation, even with thicker layers – Efficient working thanks to fast drying even at low temperatures (5 °C), thus fast masking and higher productivity.

ECLON PUR 87 is an extremely versatile, highly weather-resistant 2-component topcoat for exterior and interior use. Produces thick-film surfaces, both smooth and structured. The structural effect covers scratches, grinding marks, casting roughness and other irregularities on material surfaces. This often eliminates time-consuming sanding and filling work. Simple processing without runner formation, even with complicated geometry. Excellent direct adhesion to a wide variety of substrates. Very good colour and gloss resistance to weathering and very good surface hardness and scratch resistance. good resistance to diluted chemicals, hand perspiration, coolant up to 50 °C, cleaning agents, hydraulic oils and as well

ECLON PUR AS 2K-enamel silky gloss is a real innovation in the field of 2-component polyurethane coatings. ECLON PUR AS is characterized by a particularly high solid content (around 90 % in the ready-to-spray state) and rapid drying behavior compared to conventional materials. ECLON PUR AS can be applied at low temperatures and high humidity without any problems. The dry film is highly resistant to moisture, salt, industrial fumes, solvents and many chemicals. In addition to its excellent weather and chemical resistance, ECLON PUR AS has the following properties: High solid state / Good filling power / No wrinkling / No yellowing / No bubble formation even in thick layers and applied in high and low viscosity, even with accelerated drying. / Efficient working thanks to fast drying even at low temperatures (5 °C), thus fast masking and higher productivity.