FERROTOL is an air- and oven-drying, thick-layer applicable one-coat paint for interior use. Adheres directly to iron, cast iron and zinc. Coating thicknesses of up to 150 µm are achieved in a single operation. Due to its excellent adhesion to various metals, FERROTOL can also be used as an adhesion primer. The most important properties of FERROTOL are its extremely fast drying and excellent corrosion protection. FERROTOL can also be used as a shop primer. If necessary, it can be painted over with suitable top coats after only 30 minutes.

ACQUAFERROTOL 1K-micaceous silk matt is a water-dilutable, air- and oven-drying, thick-layer applicable material with best direct adhesion on iron and cast iron surfaces. ACQUAFERROTOL used both as a one-coat paint and as a primer with excellent corrosion protection under various top coats (including solvent-based). Coating thicknesses of up to 100 µm are achieved in a single operation. ACQUAFERROTOL also stands out for its rapid drying and good resistance to condensation water. ACQUAFERROTOL can also be used as an adhesion primer on existing coatings. Resistant to aqueous solutions of salts, drilling and cutting oils and to diluted acids and alkalis. The resistance to solvents is limited.

Nullifire SC803 is a water-based intumescent for fire protection of steel components in interior areas. SC803 enables effective fire protection of steel components indoors and in protected outdoor areas. with up to 90 minutes fire resistance.

NULLIFIRE TS816 1K finishing enamel water-dilutable is a silk matt, decorative protective coating. Used as a protective coating for NULLIFIRE SC803 1K-intumescent water-dilutable.

SC902 is a low VOC, high coverage, single coat, on-site hybrid system based on patented technology. SC902 provides effective fire protection for steel structures up to 120 minutes (R 120)

NULLIFIRE TS819 Topcoat is a system-tested 2-component topcoat for interior and exterior use. Specially formulated as a protective coating for the intumescent fire protection coating NULLIFIRE SC902 2K-insulating layer former.
The essential advantages at a glance:

Rapid drying
Weather resistant
Resistant to water, acids, alkalis, washing lye, etc.

NULLIFIRE TS134 Topcoat is a system-tested 2-component topcoat for interior and exterior use. Specially formulated as a protective coating for the intumescent fire protection coating NULLIFIRE SC803 1K-intumescent water-dilutable.
The essential advantages at a glance:

Rapid drying
Weather resistant
Resistant to water, acids, alkalis, washing lye, etc.

ACQUAFERROTOL 1K-micaceous silk matt is a water-dilutable, air- and oven-drying, thick-layer applicable material with best direct adhesion on iron and cast iron surfaces. ACQUAFERROTOL used both as a one-coat paint and as a primer with excellent corrosion protection under various top coats (including solvent-based). Coating thicknesses of up to 100 µm are achieved in a single operation. ACQUAFERROTOL also stands out for its rapid drying and good resistance to condensation water. ACQUAFERROTOL can also be used as an adhesion primer on existing coatings. Resistant to aqueous solutions of salts, drilling and cutting oils and to diluted acids and alkalis. The resistance to solvents is limited.